Automated Smoke Point Tester AD Systems Model: SP10

Automated Smoke Point Tester AD Systems Model: SP10
Description

Automated Smoke Point Tester AD Systems Model: SP10

- This unique automated instrument uses a patented system
(License TOTAL RM) based on a video camera that measures the flame.
The flame image is digitalized. The dedicated software determines
the height of the flame when its shape corresponds to the one described
in the test method. This specific flame is the one with the maximum height
without smoke generation. The SP10 performs three determinations
of the flame heights and reports the average value in strict accordance with
the test method. The results are saved in an internal database and can be printed,
transferred to a USB memory stick and/or sent to a LIMS.
Every test is fully documented and traceable,
which is imperative for aviation industry quality procedures.
- The SP10 is a versatile instrument for routine applications
at locations where quality of kerosenes and aviation turbine fuel is
evaluated in accordance with test methods ASTM D1322, IP 598.
The SP10 can be used at the following locations and more:
- Refineries
- Military
- Research and Development
- Independent Laboratories
- Aircraft Engine Manufacturers
- Pipeline and Terminals

Specification:

Technical Points Description
Test duration Less than 10 minutes
Resolution (flame height) 0.1 mm
Repeatability and Reproducibility r=0.6 and R=0.9
Four times better than manual test method (r=2.8 and R=3.8)
Parameters saved with a test result Smoke point in 0.1 mm (according to selected test method)
Sample type
Sample ID
Date & Time
Barometric pressure
Operator name
Test method
Calibration information
Instrument serial number
Software version
Results storage Up to 100 000 results
LAN connectivity Ethernet port RJ45
Printer output Serial port (printer is optional)
Data output USB(2), Ethernet
Dimensions W x D x H (mm): 330 x 390 x 413
W x D x H (inches): 13" x 15" x 16"
Weight 10kg (22lb)
Electrical 112 to 230V - 2A - 50/60Hz